What is custom titanium CNC machining?

We produce titanium parts to your specific design—your dimensions, tolerances, material, and finish. Every job is unique and built to your requirements.

What titanium grades can you machine for custom orders?

Grade 2, Grade 5, and Grade 23. Grade 5 is most common for high-strength applications. Grade 23 is used for medical implants.

Why is titanium difficult to machine?

Titanium has low thermal conductivity concentrating heat at the cutting edge, is chemically reactive causing built-up edge, has low modulus of elasticity causing deflection, and work hardens when rubbed instead of cut.

What tolerances can custom titanium machining achieve?

Standard precision holds ±0.01mm. High-precision work reaches ±0.005mm using profile compensation techniques to counter deflection.

Is there a minimum order quantity?

No. We machine single prototypes and high-volume production runs with the same quality standards.

What industries use custom titanium CNC machining?

Aerospace, medical devices, automotive high-performance parts, and marine. Titanium is specified where weight reduction and corrosion resistance are critical.

Custom Titanium

Custom titanium CNC machining is the precision processing of titanium alloys manufactured to customer-defined specifications. Titanium is prized for its exceptional strength-to-weight ratio—comparable to steel at 45% of the weight—along with outstanding corrosion resistance and biocompatibility. The most commonly machined alloy is Ti-6Al-4V, accounting for approximately half of all titanium used in manufacturing.

Titanium presents significant machining challenges: low thermal conductivity concentrating heat at the cutting edge, high chemical reactivity causing built-up edge, low modulus of elasticity causing deflection, and work hardening. We use specialized tooling with AlTiN coatings, high-pressure through-spindle coolant, and profile compensation techniques. Tolerances are held to ±0.01mm standard, with high-precision work reaching ±0.005mm. Every custom order is unique—your design, your tolerances, your material, your finish.

Our CNC Machining Services

From prototype to production — reliable quality, on-time delivery

We provide precision CNC machining services for a wide range of materials including aluminum, steel, stainless steel, copper, brass, titanium, PEEK, PTFE, acetal, nylon, and other engineering plastics. Our manufacturing capabilities cover 3-axis, 4-axis, and 5-axis CNC milling, as well as CNC turning, suitable for both prototype development and high-volume production runs.

With ISO 9001:2015 certification and a commitment to quality, we serve customers across aerospace, automotive, medical, electronics, industrial equipment, and consumer goods industries. Our in-house capabilities include surface finishing, anodizing, powder coating, heat treatment, and inspection with CMM and optical measurement equipment.

We offer competitive pricing, flexible lead times, and full material traceability. From simple brackets to complex precision components, we deliver parts that meet your specifications with reliable quality and on-time delivery.

Case StudiesMore+

SLINAR - Precision 6061 Machine Vision Gimbal Base with Vibration-Dampening Fixturing and Stress-Relief Protocol

Precision 6061 Machine Vision Gimbal Base with Vibration-Dampening Fixturing and Stress-Relief Protocol-aluminum

SLINAR - Precision 6061 Aluminum Custom-Shaped Cavity Housing: Single-Block Milled Unibody Construction with Blue Anodized Finish

Precision 6061 Aluminum Custom-Shaped Cavity Housing: Single-Block Milled Unibody Construction with Blue Anodized Finish-aluminum

SLINAR - Precision POM Medical Test Cover Plate with Dimensional Stability and Defect-Free Surface Control

Precision POM Medical Test Cover Plate with Dimensional Stability and Defect-Free Surface Control-pom

SLINAR - Precision D2 Tool Steel Fixture Fastening Component: High-Accuracy Milling with Superior Flatness for 3C Assembly Tooling

Precision D2 Tool Steel Fixture Fastening Component: High-Accuracy Milling with Superior Flatness for 3C Assembly Tooling-stainless_steel

SLINAR - Precision D2 Tool Steel Fixture Component: WEDM + Milling Solution for 32-Slot 3C Assembly Fixtures

Precision D2 Tool Steel Fixture Component: WEDM + Milling Solution for 32-Slot 3C Assembly Fixtures-tool_steel

SLINAR - PA12 Handheld Printer Prototype Enclosure via Selective Laser Sintering with Functional Surface Finishing

PA12 Handheld Printer Prototype Enclosure via Selective Laser Sintering with Functional Surface Finishing-pa

Materials

Titanium Grade 1

Titanium Grade 1 | 3.7025

Titanium Grade 1 (CNC) is a commercially pure metal with excellent corrosion and impact resistance and good machinability and weldability.

Understand Titanium Grade 1

Titanium Grade 2

Titanium Grade 2 | 3.7035

Stronger than Grade 1 and equally corrosion-resistant, excellent bio-compatibility.

Understand Titanium Grade 2

Titanium Grade 5

Titanium Grade 5 | 3.7165 | Ti6Al4V

Stronger than Grade 5, equally corrosion-resistant, and excellent bio-compatibility.

Understand Titanium Grade 5

Applications

Custom Aerospace Parts

Custom aircraft structural frames and bulkheads
Engine components and compressor parts to your design
Landing gear and hydraulic components
Fasteners and connector fittings
Missile and spacecraft components

Custom Medical Devices

Custom orthopedic implants
Surgical instruments and tool bodies
Dental implants and abutments
Bone plates and screws
Biocompatible device housings

Custom Automotive Performance

High-performance connecting rods
Valve train components to your design
Lightweight structural parts
Motorsports and racing components
Exhaust system components

Custom Marine

Subsea components and connectors
Propeller shafts and fittings
Corrosion-resistant marine hardware

Custom Industrial

High-temperature equipment components
Chemical processing parts
Wear-resistant guide rails and slides

Capabilities

We specialize in custom CNC machining of titanium parts manufactured to your exact specifications. Every order is unique—your design, your tolerances, your material, your finish. No minimum order quantity. We machine titanium alloys including Grade 2, Grade 5, and Grade 23. Equipment includes 3/4/5-axis CNC milling and CNC turning with high-pressure through-spindle coolant. Specialized AlTiN-coated tooling and profile compensation techniques are used. Tolerances held to ±0.01mm standard, ±0.005mm high-precision. Surface finishes include as-machined, passivation, anodizing, and polishing. ISO 9001:2015 and AS9100D certified. ITAR compliant.

Finishes

Anodizing

Type 1: Standard anodizing for corrosion protection
Type 2: Color anodizing for identification
Type 3: Hard anodizing for wear resistance

Passivation

Chemical treatment to remove surface contamination
Restores corrosion resistance
Standard for medical and aerospace parts

Mechanical Finishes

Bead Blasting: Uniform matte texture
Brushing: Directional grain pattern
Polishing: High-gloss reflective finish
Tumbling: Edge deburring

Plating & Coating

PTFE / Teflon: Low-friction non-stick surface
PVD Coating: Wear-resistant coating
Electroless Nickel: Additional corrosion and wear protection

Technical Specs

Property	Ti-6Al-4V (Grade 5)
Tensile Strength	950 – 1,100 MPa
Yield Strength	880 – 950 MPa
Elongation at Break	10 – 14%
Hardness	36 – 40 HRC
Density	4.43 g/cm³
Modulus of Elasticity	110 GPa
Thermal Conductivity	6.7 W/m·K
Corrosion Resistance	Excellent
Biocompatibility	Yes

Titanium Grade	Type	Key Properties	Common Uses
Grade 2	Commercially Pure	Corrosion resistance, formability	Chemical equipment, marine
Grade 5	Alpha-Beta	High strength, best overall properties	Aerospace, medical, automotive
Grade 23	Alpha-Beta	ELI, high purity	Medical implants, surgical

Parameter	Capability
Max Part Size (Milling)	2,000mm x 800mm x 600mm
Max Part Size (Turning)	600mm diameter x 1,500mm length
Standard Tolerance	±0.01mm
High-Precision Tolerance	±0.005mm
Surface Finish (As-Machined)	Ra 1.6 – 3.2μm
Surface Finish (Precision)	Ra 0.8μm

FAQs

What is custom titanium CNC machining?

We produce titanium parts to your specific design—your dimensions, tolerances, material, and finish. Every job is unique and built to your requirements.
What titanium grades can you machine for custom orders?

Grade 2, Grade 5, and Grade 23. Grade 5 is most common for high-strength applications. Grade 23 is used for medical implants.
Why is titanium difficult to machine?

Titanium has low thermal conductivity concentrating heat at the cutting edge, is chemically reactive causing built-up edge, has low modulus of elasticity causing deflection, and work hardens when rubbed instead of cut.
What tolerances can custom titanium machining achieve?

Standard precision holds ±0.01mm. High-precision work reaches ±0.005mm using profile compensation techniques to counter deflection.
Is there a minimum order quantity?

No. We machine single prototypes and high-volume production runs with the same quality standards.
What industries use custom titanium CNC machining?

Aerospace, medical devices, automotive high-performance parts, and marine. Titanium is specified where weight reduction and corrosion resistance are critical.

Services

Industries

Cases